Valve accessories such as gate valves, ball valves, butterfly valves, globe valves, check valves, etc. are often more prone to damage than the valve itself, such as flange gaskets. So how to replace damaged flange gaskets?
Replacing valve flange gaskets requires following the following four basic principles: preparing materials and tools, paying attention to the operating steps, and meeting two technical requirements and five key points.
(1) Preparation work
â‘ Materials: butter, cotton yarn, leak detector, sealing gasket
â‘¡ Tools: wrench, screwdriver.
(2) Operation steps
â‘ Remove the flange connection bolts, dismantle the valve or remove the leaking end pipe section. Remove the waste sealing gasket from the sealing surface.
â‘¡ Choose a suitable gasket and apply a layer of butter evenly on both sides.
â‘¢ Place the sealing gasket on the sealing surface between the two flanges, align it with the center of the two flanges and the center of the bolt hole, install the bolt, tighten the nut, and evenly tighten the nut diagonally in multiple times. It is advisable for the bolt to extend 2-3 pitches beyond the nut length. After the installation of the flange gasket is completed, it should undergo a working pressure test and be considered qualified if there is no leakage.